Using the menus
To open the menus, press the Menu button on the remote. (The menus automat- |
|
|
| remote navigation | |
|
|
| buttons | ||
|
|
| |||
ically close after 60 seconds if no buttons are pressed.) The Main menu appears. |
|
|
|
| |
Use the arrow buttons to move up and down to highlight the desired submenu, |
|
|
|
| |
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
then press the Select button. |
|
|
|
| |
To change a menu setting, highlight it, press Select, then use the up and down | Main menu | ||||
arrow buttons to adjust the value, select an option using radio buttons, or turn the | |||||
|
|
|
| ||
feature on or off using check boxes. Press Select to confirm your changes. Use |
|
|
|
| |
the arrows to navigate to another setting. When your adjustments are complete, |
|
|
|
| |
navigate to Previous or Exit, then press Select to go to the previous menu; press |
|
|
|
| |
the Menu button at any time to close the menus. |
|
|
|
| |
Dots appear before the menu name. The number of dots indicate menu’s level, ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
•The Picture menu provides image adjustments.
•The Settings menu provides
•The Source Info menu provides a
Certain menu items may not be visible or may be grayed depending upon a particular source being connected. Differences are also seen in analog versus digital video sources and interlaced versus progressive sources.
Menu options are grayed out only if the source is selected but no signal is present. For example, if the projector is set to a video source but the source, such as a DVD player, is turned off video menu options are grayed out.
Picture menu
dots
Settings menu
Source Info menu
19