Connector Panel

Remove the cable cover, if attached, to access the connector panel. Replace the

composite

cover after the projector is installed, if desired.

The projector provides the following connection options:

•M1-DA/DVI (Digital Visual Interface)

•HDMI™ (High Definition Multimedia Interface)

•Component (RCA)

•S-video

•Composite video (RCA)

See “Video connectors” on page 7 for details.

RCA

S-video

The projector also provides the following connectors:

HDMI

M1-DA/

component

 

 

DVI

 

 

 

RCA

RS-232

12 volt DC output

 

 

•RS-232 for serial control

•Two 12 volt DC outputs (see below)

•IR input for connection to Niles/Xantech compatible IR repeater systems

12 volt DC outputs

The 3.5mm mini-jack triggers provide a 12 volt, 0.25 amp DC output. They provide a constant output while the projector is on. They are typically used for screen con- trol. For example, if you connect your projection screen to the vertical screen trigger with the cable that came with your screen, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position. The horizontal screen trigger output can be used to control curtains or an adjustable aspect ratio screen.

+12v

IR input

ground

3.5mm plug

to, for example, screen relay (see screen manufacturer for details)

4