Connecting the DVD
Connecting the DVD
•Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the Component jacks on the Monitor.
•Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the Component jacks on the Monitor.
How to use
1Turn on the DVD player.
2Press INPUT button on the remote control of the Monitor and select Component1 or Component2.
Supported Signals for Component ports
Component1 | Component2 |
480i / 60Hz
480p / 60Hz
576i / 50Hz
576p / 50Hz
720p / 50Hz
720p / 60Hz
1080i / 50Hz
1080i / 60Hz
Component Input ports
You can get better picture quality if you connect DVD player with component input sockets as below.
Component ports of the | Y | PB | P R | |
Monitor | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
Video output ports of | Y | Pb | Pr | |
Y | ||||
DVD player | Y | Db | Cr | |
| Y | PB | PR |
•Normal DVD source is based on 480i, which should be through normal YPbPr of Component signal.
•Component, PC, DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other ports are unavailable.
20
OWNER'S MANUAL
