English

3. Wood working drill: Code No. 959183

4.Drill chuck adapter set: Code No. 321823 Use the drills available on the local market.

Optional accessories are subject to change without notice.

APPLICATION

Driving and removing of small screws, small bolts, etc.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the handle tightly and push the battery latch to remove the battery. (Figs. 1 and 2)

CAUTION:

Never short-circuit the battery.

Table 1

2.Battery installation

Insert the battery while observing its polarities (see Fig. 2).

CHARGING

Before using the impact driver, charge the battery as follows.

1.Connect the charger’s power cord to a receptacle. When the power cord is connected, the charger’s pilot lamp will blink in red. (At 1-second intervals)

2.Insert the battery into the charger.

Insert the battery firmly, in the direction shown in Fig. 3, until it contacts the bottom of the charger compartment.

CAUTION:

If the battery is inserted in the reverse direction, not only recharging will become impossible, but it may also cause the fuse to blow, or problems in the charger such as deformed recharging terminal.

3.Charging

When inserting a battery in the charger, charging will commence and the pilot lamp will light continuously in red.

When the battery becomes fully recharged, the pilot lamp will blink in red. (At 1-second intervals) (See Table 1)

(1)Pilot lamp indication

The indications of the pilot lamp will be as shown in Table 1, according to the condition of the charger or the rechargeable battery.

Indications of the lamps

Before charging

While charging

Charging complete

Charging impossible

Charging impossible

Blinks

Lights for 0.5 seconds. Does not light for

(RED)

0.5 seconds. (off for 0.5 seconds)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights

Lights continuously

(RED)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinks

Lights for 0.5 seconds. Does not light for

(RED)

0.5 seconds. (off for 0.5 seconds)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flikers

Lights for 0.1 seconds. Does not light for

(RED)

0.1 seconds. (off for 0.1 seconds)

Lights

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights continuously

(GREEN)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Malfunction in the battery or the charger

The battery temperature

is high, making recharging impossible.

(2)Regarding the temperatures of the rechargeable battery

The temperatures for rechargeable batteries are as shown in the table below, and batteries that have become hot should be cooled for a while before being recharged.-

Table 2 Recharging ranges of batteries

 

Temperatures at

Rechargeable batteries

which the battery

 

can be recharged

EB14B

–5°C – 60°C

EB1430H

0°C – 45°C

7

Page 8
Image 8
InFocus WH14DM manual Application, Battery REMOVAL/INSTALLATION, Charging, Battery removal