Ingersoll-Rand 67161-() specifications PROGRAMMING continued, Remarks

PROGRAMMING (continued)

	PRESS	DISPLAY	REMARKS
STEP			This section of the menu is used to set Preset B value.
1
SETTING	PROG
PRESET B		#####	This is Preset B. To change, press the arrow key under the
			digit(s) to change. Press ``enter￿ to enter the displayed val7
			ue.
	ENTER
STEP
2
SETTING	PROG
SCALING			This section of the menu is used to set up the scaling factor
FACTOR
			for the count input.

PROG

	This sets the decimal for factor A. Press the arrow key under
	the digit where the decimal is desired. To clear the decimal,
	press the arrow key furthest to the right.
ENTER
#####	This is the scaling factor for the count input. To change,
	press the arrow key under the digit(s) to change. Press ``en7
	ter￿ to enter the displayed value.

ENTER

STEP

3

SETTING

THE

COUNTER

PROG

PROG

	This section of the menu sets up the counter information.
PROG
	Press the ``PROG￿ key to choose ``RST 0￿ (reset to 0, count
or	up) or ``SET PR￿ (set to preset, count down), press the ``en7
	ter￿ key to enter the displayed choice.
ENTER
	This sets the decimal location for the ``A￿ and ``B￿ counters.
	Press the arrow key under the desired digit location. To
	clear the decimal, press the arrow key furthest to the right.
ENTER	Press the ``enter￿ key to enter the displayed location.
	This section sets the second counter operation. Press the
or	program key to choose ``GR TOT￿ (grand total) or ``BA TOT￿
	(batch total). Press the ``enter￿ key to enter the displayed
ENTER	choice.
	Press the ``PROG￿ key to choose ``HIGH CPS￿ (0 7 9.99
or	KHz) or ``LOW CPS￿ (0 7 40 Hz). Press the ``enter￿ key to
	enter the displayed choice.
ENTER

PAGE￿￿4 OF 8 67161￿X