![PRESSDISPLAYREMARKS](/images/new-backgrounds/65117/651179x1.webp)
PROGRAMMING (continued)
PRESSDISPLAYREMARKS
STEP
4
PROG
SETTING
THE RATE
PROG
PROG
This section of the menu is used to set up the rate informa3 tion.
PROG
|
| Press the ``PROG key to choose SECS (rate per second), |
|
| minS (rate per minute) or HourS (rate per hour). Press ``en3 |
ENTER | or | ter to enter displayed choice. |
| ||
|
| This sets the normalizing (averaging) factor. Press the ar3 |
| # # | row keys under the desired digits to change. Press ``enter |
ENTER |
| to enter displayed value. |
|
| |
|
| This sets the number of significant figures to be displayed. |
| # | Press the arrow key under the digit to change. Press ``enter |
ENTER |
| to enter displayed value. |
|
| |
| # # | This sets the delay time (2 3 24 sec.) that the unit will ``look |
| for valid input data before the display falls to ``0. Press the | |
ENTER |
| arrow key under the digits to change. Press ``enter to enter |
| displayed value. | |
|
|
STEP
5
PROG
SETTING
LOCK
PROG
PROG
PROG
|
| This section of the menu is used to set up the lockout type | |
|
| and code number. | |
PROG |
|
| |
|
| LC PG = Locks program but presets and reset are acces3 | |
| or | sible (see description). | |
|
| LC ALL = Locks all keypad buttons except ``start, ``stop | |
ENTER |
| and ``view. | |
|
| Press the ``PROG button to toggle between choices. Press | |
|
| ``enter to enter displayed choice. | |
|
| After ``code flashes, the display will show the existing lock | |
| flashes | code. To change the code, press the key under each digit | |
| to be changed. Press ``enter to enter displayed value. See | ||
| followed by: | ||
ENTER | the following to turn lock on or off. | ||
##### | |||
|
|
67161&X | PAGE5 OF 8 |