10Controlling the rest of your system
Chapter 10:
Controlling the rest of your system
Setting the remote to control other components
There are several ways to set your remote to control the other components in your system. The easiest way to do this is to assign the component’s manufacturer preset code (starting on page 67) to one of the MULTI CONTROL buttons on the remote control.
The buttons can be set to control the following components:
Button | Controllable Components |
DVD/LD: | DVD or LD player |
TV/SAT: | TV or Satellite tuner |
VCR/DVR: | VCR or Digital Video Recorder |
CD: | CD player |
CD Recorder, Tape deck | |
| or MD player |
TV CONT: | TV or Cable TV tuner |
TUNER: | FM/AM tuner |
|
|
If you can’t find a preset code that matches the component you want to control, you can still teach the remote individual commands from another remote control (page 61).
•The remote control will exit an operation after 1 minute of inactivity.
Selecting preset codes directly
MULTI CONTROL
DVD/LD | TV/SAT | VCR/DVR | TV CONT |
C D | TUNER | RECEIVER |
MASTER
VOLUME
TUNE 
ST
ST
ENTER
TUNE 
1While pressing the RECEIVER button, press and hold the 1 button.
The LED blinks.
2Press the MULTI CONTROL button for the component you want to control.
The LED lights.
60
En
