Controls and displays | 05 |
FL DIMMER
Dims or brightens the display.
4MASTER VOLUME +/–
Use to set the listening volume.
5Receiver and component control buttons (Press the corresponding MULTI CONTROL button first to access).
These controls function according to the component you’ve selected.
TOP MENU
Displays the disc ‘top’ menu of a DVD.
AUDIO
Changes the audio language or channel with DVD discs.
MCACC SETUP
Use to setup your speaker system using the
MENU
Displays the disc menu of
INPUT ATT
Attenuates (lowers) the level of an analog input signal to prevent distortion.
T.EDIT
Use to memorize and name a station for recall using the STATION +/– buttons (page 53).
GUIDE
Displays the guides on a digital TV.
SUBTITLE
Displays/changes the subtitles included in multilingual
SLEEP
Use to put the receiver in sleep mode and select the amount of time before the receiver turns off.
6(TUNE
7Component/Tuner control buttons
The main buttons ( , , etc.) are used to control a component after you have selected it using the MULTI CONTROL buttons. The tuner/DTV controls above these buttons can be accessed after you have selected the corresponding MULTI CONTROL button (TUNER or TV/SAT (when connected to DTV)).
RETURN
Returns to the last screen selected when using a digital TV tuner.
BAND
Switches between the tuner AM and FM bands (page 52).
RF ATT
Use to lower the input level of a radio signal that is too powerful or contains interference that causes the sound to distort (page 52).
DISPLAY
Use to switch the display between the station preset name, frequency and RDS data when using the tuner.
CLASS
Switches between the three banks (classes) of radio station presets (page 53).
MPX
Switches between stereo and mono reception of FM broadcasts. If the signal is weak then switching to mono will improve the sound quality (page 52).
English Italiano Français Deutsch Nederlands Español
33
En
