Pioneer VSX-D812 An introduction to EON, Using EON, Press the Band button to select the FM band

Using the tuner

08

1Press the BAND button to select the FM band.

RDS is only possible in the FM band.

2Press the PTY SEARCH button. SEARCH shows in the display.

3Use the MULTI JOG dial to select the program type you want to hear.

4Press ENTER to search for the program type.

The system starts searching through the station presets for a match. When it finds one, the search stops and the station plays for five seconds.

5If you want to keep listening to the station, press ENTER within the 5 seconds. If you don’t press ENTER, searching resumes.

If NO PTY is displayed it means the tuner couldn’t find that program type at the time of the search.

•RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station presets NO PTY is displayed. FINISH means the search is complete.

An introduction to EON

When EON (Enhanced Other Network information) is turned on, the receiver jumps to an EON-linked broadcast when it begins, even if a receiver function other than the tuner is being used. It can’t be used in areas that EON information isn’t transmitted and when FM broadcast stations don’t transmit PTY data. When the broadcast ends, the tuner returns to the original frequency or function.

Using EON

STATION	TUNING		ADVANCED	STEREO/	SIGNAL	MIDNIGHT/
		STANDARD SURROUND		DIRECT	SELECT	LOUDNESS

				PHONES SURR.
				LISTENING MODE
TUNER EDIT CLASS	BAND	MPX	PTY	EON
			SEARCH	MODE
MULTI JOG				SETUP	DIGITAL IN
				MIC

1Press the BAND button to select the FM band.

EON is only possible in the FM band.

2Press EON MODE to select one of the possible modes.

Press repeatedly to switch between:

•TA (Traffic Announcement) – Sets the tuner to pick up traffic information when it is broadcast.

•NEWS – Sets the tuner to pick up news when it is broadcast.

•OFF – Switches off the EON feature.

When set to TA or NEWS, the EON indicator in the display lights. The EON indicator blinks when the receiver switches automatically to an EON broadcast.

•The EON function does not work when listening to AM reception.

•You can’t search for traffic announcements and news at the same time.

•You cannot operate the T.EDIT and SEARCH buttons while the EON indicator in the display is lit.

•The indicator lights to inform you that the currently tuned station carries the EON data service.

•You can’t change to a different function (for example, DVD/LD) during an EON search.

English Italiano Français Deutsch Nederlands Español

57

En