Pioneer VSX-D912, VSX-D812 Naming station presets, Press T.EDIT Tuner Edit, Press Enter

08Using the tuner

2 Press T.EDIT (TUNER EDIT).

The display shows ST. MEMORY, then a blinking memory class.

STEREO TUNED

SPA

A - 99.50

3Press CLASS to select one of the three classes then press ST +/– (STATION +/–) to select the station preset you want.

You can also use the the MULTI JOG dial (front panel) to select a station preset.

4Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.

Naming station presets

For easier identification, you can name your station presets.

1Choose the station preset you want to name.

See Listening to station presets below for how to do this.

2Press T.EDIT (TUNER EDIT).

The display shows ST. NAME, then a blinking cursor at the first character position.

3 Input the name you want.

Names can be up to four characters long.

•Use the MULTI JOG dial (front panel) or the ST +/– buttons (remote) to select characters.

•Press ENTER to confirm a character. If no character is input, a space is input.

•The name is stored when ENTER is pressed after choosing the fourth character.

54

•To erase a station name, simply repeat steps 1-3 and input four spaces instead of a name.

•Once you have named a station preset, you can press DISPLAY when listening to a station to switch the display between the name and the frequency.

En