Setting up
Coaxial digital 1:
• Default settings: DVD
• Use or to assign the coaxial digital 1 input (DVD, TV, CD, CDR, VCR or OFF).
Coaxial digital 2:
• Default setting: CD
• Use or to assign the coaxial digital 2 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 1:
• Default settings: TV
• Use or to assign the optical digital 1 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 2
• Default setting: CDR
• Use or to assign the optical digital 2 input (DVD, TV, CD, CDR, VCR or OFF).
•You can’t assign two inputs to the same function. For example, assigning input 1 to the default setting of input 2 automatically switches input 2 to OFF.
07
Manually calibrating your | English | |
listening area (MCACC) | ||
| ||
You can use the |
| |
bration (MCACC) system to fine tune your |
| |
speaker levels and channel delay. These are |
| |
calibrated according to the distance from |
| |
your left front speaker to the listening posi- |
| |
tion. You will hear a series of test tones that | Italiano | |
will allow you to set the speaker levels and | ||
| ||
channel delay to your liking. The advantage of |
| |
doing this is that you can achieve an overall |
| |
balance defined by the front speakers (the |
| |
main speakers for home theater). | Français | |
• You must complete the Speaker setting on | ||
| ||
page 44 before using the MCACC setup. |
| |
RECEIVER | Deutsch | |
ENTER | Nederlands | |
MCACC |
| |
SETUP |
| |
• These test tones can be loud, so take care | Español | |
| ||
that there is no one in the room who will |
| |
be startled by the noise. |
|
49
En
