07Setting up
1Press RECEIVER.
2Press MCACC SETUP.
The MCACC system uses the left front speaker as a reference point to calibrate the speaker level and channel delay.
The front left speaker tone and the target speaker (the one that you’re trying to adjust) tone will sound in turns, so you can judge which needs to be louder.
3 Use and to adjust each channel level in turn, pressing ENTER to go to the next channel when you’re done.
The test tone is output in the following order (depending on the speaker setting):
R C LS
SW SB RS
4Specify the distance from the front left speaker to your listening position using
and then press ENTER.
5 Use and to adjust the delay for each channel in turn, pressing ENTER to go to the next channel when you’re done.
Listen to the reference channel and use it to measure the target channel. Stand facing the two speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are arriving simulta- neously at a position slightly in front of you and between your arm span.
The test tone for channel delay is output in the same order as step 5:
R C LS
SW SB RS
After you have completed all the channels in your speaker setup, the volume level returns to normal and COMPLETE, then RESUME shows in the display.
•Using the MCACC system to set up your speaker system will overwrite any previous settings you had for the STANDARD or ADVANCED SURROUND modes.
50
En
