![DESCRIPTION](/images/new-backgrounds/30319/303193x1.webp)
DESCRIPTION | The LCN Presence Sensor (PN: |
| |
| sensing device that provides detection for the triggering of automatic swing door safety functions. When used with |
| LCN’s lockout devices, the sensor is programmed to allow two different fields of detection - one for detection when |
| the door is in the fully closed position and the other for detection when the door is fully open. While the door is in |
| the fully open position, the Presence Sensor extends its coverage back through the threshold area of the doorway, |
| to provide coverage that will overlap with LCN’s motion sensors. |
| As with all of LCN’s programmable sensing devices, full adjustability is achieved with the use of LCN’s |
| remote control unit. This allows alteration of all of the available functions as well as for inquiry of existing settings. |
| Should the need arise; the Presence Sensor may also be tuned by means of two |
| contained on the PC Board within the unit. With these two buttons, the Presence Sensor’s field of detection can be |
| altered without the use of the |
| used in addition to the Presence Sensor, LCN recommends the use of a lockout safety beam to allow safety |
| signaling if the zone is entered during a door closing cycle. |
TECHNICAL |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Installation Height - Variable |
| ||||||||||||
SPECIFICATIONS |
| Mounting Angles |
|
|
|
|
|
|
|
|
|
| ||
|
| Presence Sensor only | +5°, +10° (factory default setting: +5°) |
| ||||||||||
|
| Presence Sensor with BodyMount | 0°, +5°, +10° |
|
|
|
|
|
| |||||
|
| Power Supply | 12 to 24 V AC / DC +/- 10% |
|
|
| ||||||||
|
| Frequency |
|
|
| |||||||||
|
| Output | Max. Voltage at contacts: 60V DC / 125V AC |
| ||||||||||
|
|
|
|
| Max. Current at contacts: 1 A |
|
|
| ||||||
|
|
|
|
| Max. switching power: 30 W (DC), 60 VA (AC) |
| ||||||||
|
| Relay Hold Time | 0.5 to 9 seconds |
|
|
| ||||||||
|
| Operating Temperature |
|
|
| |||||||||
|
| Immunity | Immune to electrical and radio frequency interference |
| ||||||||||
|
| Cable | 4’- six conductor cable |
|
|
| ||||||||
|
| Weight | 1lb. 11 oz. (765g) |
|
|
| ||||||||
|
| Dimensions | 11.8”L (305 mm.) x 1.9”H (51 mm.) x 1.9”W (46 mm.) |
| ||||||||||
|
| Material | Aluminum & ABS plastic |
|
|
| ||||||||
|
| Housing Color | Black anodized aluminum |
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPONENT ID |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Left Lens |
|
|
|
|
| Red LED |
|
|
| Right Lens |
| |
|
|
|
|
|
|
|
|
| ||||||
|
| Left End Cap |
|
|
|
|
|
|
|
| Right End Cap |
| ||
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| Center Eye Shield |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| 4’ Cable |
|
INSTALLATION
TIPS
The sensor must be | The sensor must not have | The sensor should be |
firmly fastened to | any unwanted objects likely | mounted flush with bottom of |
prevent vibration. | to move or vibrate in its | door header. |
| path. |
|
|
|
|
75.5255.02 XXXXXXXX |
|
Page 1 of 11 |