12
NS-28ED200NA14 Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see “What connection should I use?” on page 11.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI cable (not provided) to one of the HDMI jacks on the side o r back of you r TV and t o the HDMI
OUT jack on the cable or satellite box.
4Plug your TV’s power adapter into a power outlet, turn on your T V, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight HDMI1, HDMI 2, or HDMI 3, then press OK.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
HDMI cable
Cable or
satellite box
Back of TV
HDMI cable
connector
HDMI jack
On your TV