31
Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Using analog audio
When you connect an analog home theater system to the /AUDIO OUT jack, the T V speakers are muted.
To connect a home theater system using analog audio:
1Make sure that your TV’s power adapter is unplugged and the home theater system is turned off.
2Connect a 3.5mm audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
Note
• For information about selecting the audio out mode for a home theater,
see the Headphone/Audio Out option in “Adjusting sound settings” on
page45 .
• You can connect headphones, an amplifier, a home theater system, or a
sound bar to the /AUDI O OUT jack. If you want to use headphones,
you need to disconnect the amplifier, home theater system, or sound
bar.
3.5mm audio cable
Home theater system
Side of TV
3.5mm audio
cable connector
/AUDIO OUT
jack
On your TV