20
NS-28ED200NA14 Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using component video:
1Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
2Connect a component video cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y, PB, and PR jacks on
the side of your TV and to the CO MPONENT OUT jacks on the DVD or Blu-ray player.
3Connect an audio cable (not provided) to the LandRAUDIO jacks on the side of your TV and to the
Land RAUDIO OUT jacks on the DVD or Blu-ray player.
4Plug your TV’s power adapter into a power outlet, then turn on your TV.
5Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6Press INPUT to open the INPUT SOURCE list.
7Press S or T to select Component/AV, then press OK.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The COMPONENT IN/AV IN VIDEO/Y, PB, and PR video jacks (used to
connect a component device) share the L and R AUD IO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
Note
You can also press VIDEO repeatedly to select the DVD or Blu-ray player.
Side of TV
Audio cable
Component
video cable
DVD or Blu-ray player
Component
video cable
connectors
Analog audio
cable
connectors
Component
video jacks
Analog
audio
jacks
On your TV