16
NS-28ED200NA14 Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the ANT/ CABLE jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4Plug your TV’s power adapter into a power outlet, turn on your T V, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight TV, then press OK.
7If you cannot tune to channels you know exist, scan for channels. See “Autom atically scanning for channels” on
page 47.
Notes
Use a coaxial cable to eliminate interference and noise from radio
waves.
Do not bundle the coaxial cable with the power adapter or other cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
ANT/CABLE
jack
On your TV