Insignia 32" LCD
If you selected Antenna or Cable, your | Selecting the video input source |
| To select the video input source: | |
available channels in your area and stores the | |
channel information in the channel list. This may | 1 Press INPUT. The input source list opens. |
take several minutes. While scanning, your |
|
| |
If you selected Cable/Satellite Box, your |
|
| |
channels, and no progress bar is displayed. |
|
Notes
•During auto scan, digital channels will be scanned first, then analog channels. When all available digital channels have been found, the message will ask you “Do you want to continue scanning analog channel?” You can select No, then press ENTER to exit the analog channel scan, or let your
•You can press MENU or EXIT at any time to stop the auto scan, but you will need to run the auto scan again to create a channel list.
8If you connected a cable or satellite TV box, press INPUT to open the source list, press
INPUT repeatedly or press 
or 
to highlight the jack the box is connected to, then press
Understanding TV basics
Note
Unless otherwise noted, all tasks in this section are based on using the remote control.
Turning your TV/Blu-ray combo on or off
To turn your 1Make sure that you have connected the power cord to your
2Press 
(power). Your
3Press 
(power) again. Your
2Press INPUT repeatedly or press 
or 
to highlight a video input source, then press ENTER. You can select:
•AV (device connected to the AV INPUT VIDEO or AV INPUT
Warning
When your
Note
When your
www.insigniaproducts.com | 23 |