Playing TV audio only
When watching TV, you can turn off the TV picture and listen to the audio only.
To play TV audio only:1Press MENU. The
2Press 
or 
to select CHANNELS. The CHANNELS menu opens.
3Press 
to highlight Audio Only, then press 
or ENTER to access the Audio Only settings.
4Press 
or 
to select On or Off.
5Press MENU to return to the previous menu, or press EXIT to close the menu.
Notes
•After Audio Only is turned on, the TV picture will disappear within 10 seconds after the
•Audio Only works only when the input source is TV and your
•To exit Audio Only mode, press any button except the power button. When you exit Audio Only mode, the Audio Only setting is automatically reset to Off.
Note
Unless otherwise noted, all tasks in this section are based on using the remote control.
Automatically scanning for channels
When you scan for channels, your 
/CH 
, your
If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels.
To automatically scan for channels:1Press MENU. The
2Press 
or 
to select CHANNELS. The CHANNELS menu opens.
3Press 
to highlight Auto Channel Search, then press 
or ENTER to access the Auto Channel Search screen.
28 | www.insigniaproducts.com |