Insignia 32" LCD TV/Blu-ray Combo, 1080p

Connecting a computer

Note

If the computer has an HDMI jack, you can connect it to an HDMI jack on your TV/Blu-ray combo.

To connect a computer:

1Make sure that your TV/Blu-ray combo’s power cord is unplugged and the computer is turned off.

2Connect a VGA cable to the PC INPUT VGA jack on the back of your TV/Blu-ray combo and to the VGA jack on the computer.

Back of TV/Blu-ray combo

Supported resolutions

You may need to change the computer’s resolution to one listed in the following table.

ModeResolutionRefresh rate

VGA

640

× 480

60 Hz

 

 

 

 

VGA

720

× 400

70 Hz

SVGA

800

× 600

60 Hz

 

 

 

XGA

1024 × 768

60 Hz

WXGA

1280 × 720

60 Hz

 

 

 

 

SXGA

1280

× 1024

60 Hz

WXGA

1360 × 768

60 Hz

 

 

 

 

FHD

1920

× 1080

60 Hz

 

 

 

 

3Connect an audio cable to the PC INPUT AUDIO jack on the back of your TV/Blu-ray combo and to the AUDIO OUT jack on the computer.

4Turn on your TV/Blu-ray combo, then turn on the computer.

5Press INPUT to open the source list, press

INPUT repeatedly or press or to highlight VGA, then press ENTER.

Notes

•The on-screen menus may have different options in PC mode than in TV mode.

•If there is no video signal from the computer when your TV/Blu-ray combo is in PC mode, “No signal” appears on the TV screen.

•Your TV/Blu-ray combo does not support a Plug and Play connection to the computer.

Connecting a digital optical audio system

To connect a digital optical audio system:

•Connect a digital audio optical cable to the DIGITAL OUTPUT OPTICAL jack on the back of your TV/Blu-ray combo and to the DIGITAL OPTICAL INPUT jack on the audio system.

Back of TV/Blu-ray combo

Digital optical audio system

Note

The DIGITAL OUTPUT OPTICAL jack only works with digital sources.

www.insigniaproducts.com

19