NS-65D260A13 Insignia 65" 1080p LED TV

Using DVI (same as HDMI but requires a sound connection)

Note

You must use the HDMI 1 (DVI) jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.

To connect a DVD or Blu-ray player using DVI:

1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

Using component video (better)

To connect a DVD or Blu-ray player using component video:

1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2Connect a component video cable (not provided) to the Y/VIDEO, PB, and PR jacks on the back of your TV and to the COMPONENT OUT jacks on the component video device.

Cables are often color-coded to match color-coded jacks.

2Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the DVD or Blu-ray player.

3Connect the other end of the cable to the HDMI1(DVI) jack on the back of your TV.

Back of TV

Component video cable

Audio cable

3.5mm audio cable

Back of TV

DVD or Blu-ray player

DVD or Blu-ray player

HDMI cable with HDMI-DVI adapter

4Connect a 3.5mm audio cable (not provided) to the PC IN AUDIO jack on the back of your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player.

5Plug your TV’s power cord into a power outlet, then turn on your TV.

6Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player.

7Press INPUT to open the INPUT SOURCE list.

8Press S or T to select HDMI1, then press

ENTER.

Note

You can also press HDMI one or more times to select the DVD or Blu-ray player.

3Connect an audio cable (not provided) to the AV IN AUDIO L/R jacks on the back of your TV and to the L/R AUDIO OUT jacks on the DVD or Blu-ray player.

Notes

•The Y/VIDEO, PB, and PR video jacks (used to connect a component device) share the

AV IN AUDIO L/R jacks with the Y/VIDEO jack (used to connect a composite device).

•When you connect the audio using the AV IN AUDIO L/R jacks, the audio output is analog.

4Plug your TV’s power cord into a power outlet, then turn on your TV.

5Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player.

6Press INPUT to open the INPUT SOURCE list.

7Press S or T to select Component, then press

ENTER.

14

www.insigniaproducts.com