Adjusting sound settings
To adjust sound settings:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight AUDIO, then press T or ENTER. The Audio menu opens.
3Press S or T to highlight an option, then press ENTER to access the option. You can select:
•Sound Mode—Selects the sound mode. You can select:
•Standard—Balances treble and bass. This setting is good for watching standard TV broadcasts.
•Theater—Enhances treble and bass for a rich sound experience. This setting is good for watching DVDs, Blu-ray discs, and HDTV.
•Music—Preserves the original sound. This setting is good for listening to music.
•News—Enhances vocals for TV audio. This setting is good for watching news broadcasts.
•Custom—Lets you manually adjust sound settings.
•Balance—Adjusts the balance between the left and right audio channels.
•Bass—Adjusts the low sounds.
•Treble—Adjusts the high sounds.
•TV Speakers—Selects where to play TV audio. You can select On (default setting) to play audio through the TV speakers, or select Off to turn off the TV speakers and play audio through the speakers on an external audio system.
•Digital Audio/SPDIF—Sends digital audio to an external audio system. You can select PCM (to output audio in 2-channel stereo), or RAW (to pass through the original digital audio sound).
•MTS/SAP—(Analog channels only) Selects the audio mode. You can select:
•Mono—Select this option if there is noise or static on weak stereo broadcasts.
•Stereo—Select this option for programs broadcast in stereo.
•SAP—Select this option to listen to a secondary audio program, if available.
Note
You can also press MTS/SAP one or more times to select the audio mode.
•Audio Language—(Digital channels only) Selects an alternate audio language, if available.
•Reset Audio Settings—Reset all audio settings to factory defaults.
4Press W or X to adjust the option, or press S or T to select a setting.
5Press MENU to return to the previous menu, or press EXIT to close the menu.
