Insignia 65" 1080p LED TV

Installing the stand or wall-mount bracket

Notes

•If you plan to wall-mount your TV, do not install the stand.

•Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:

1Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Secure the stand column to the TV using five M6 x 18 mm screws (provided).

Screw type

Screw length

# of screws

M6

18 mm

5

 

 

 

Installing a wall-mount bracket

Warning

This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 53.)

To attach your TV to a wall-mount bracket:

1Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the five screws that secure the stand column to the TV, then remove the stand column.

3Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.

Note

•The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

•The mounting holes on the back of your TV take type M6 screws.

15.75 in. (400 mm)

3Secure the TV stand base to the stand column using seven M6 x 18 mm screws (provided).

Screw type

Screw length

# of screws

M6

18 mm

7

 

 

 

15.75 in. (400 mm)

Wall-mount brackets

www.insigniaproducts.com

5