BIf you select Cable, a message asks if you have a cable box:
•Select No, then press ENTER if no cable box is connected. Your TV scans for available channels. The scan may take several minutes.
•Select Yes, then press ENTER if a cable box is connected. A message asks how you connected the cable box to your TV.
•Select AV, Component, or HDMI, then press ENTER if you connected a cable box to your TV using one of these cables. Read the message, then press ENTER to close the wizard.
•Select Coaxial, then press ENTER if you connected a cable box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only).
Note
You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.
CIf you select Satellite Box, a message asks how you connected the satellite box to your TV:
•Select AV, Component, or HDMI, then press ENTER if you connected a satellite box to your TV using one of these cables. Read the message, then press ENTER to close the wizard.
•Select Coaxial, then press ENTER if you connected a satellite box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only).
Note
You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.
12To watch TV, press INPUT, press S or T to highlight the video input source for your TV in the INPUT SOURCE list, then press ENTER.
•If your TV is connected to an antenna, cable TV (no box), or cable or satellite TV box using a coaxial cable, select TV.
•If your TV is connected to a cable or satellite box using an HDMI cable or HDMI cable with a DVI adapter, select HDMI1, HDMI2, or HDMI3.
•If your TV is connected to a cable or satellite box using a component video cable, select Component.
•If your TV is connected to a cable or satellite box using a composite video cable, select AV.
22 | www.insigniaproducts.com |