NS-65D260A13 Insignia 65" 1080p LED TV

Setting the power on picture mode

You can set the picture mode your TV uses when you turn it on.

To set the power on picture mode:

1Press MENU. The on-screen menu opens.

2Press W or X to highlight SETTINGS, then press ENTER. The Settings menu opens.

3Press S or T to highlight Reset to Default, then press ENTER. The Settings-Reset to Default menu opens.

4Press S or T to highlight Power on in Vivid Mode, then press ENTER.

5Press S or T to highlight On (when you turn on your TV, it will be in Vivid picture mode) or Off (when you turn on your TV, it will be in the picture mode it was in before you reset to defaults), then press ENTER.

6Press MENU to return to the previous menu, or press EXIT to close the menu.

Displaying a banner at power on

If the picture mode is set to Retail Mode, your TV can display a retail banner when you turn on your TV.

Note

The picture mode is set during the first time setup. For more information, see “Turning on your TV for the first time” on page 20.

To display a banner at power on:

1Press MENU. The on-screen menu opens.

2Press W or X to highlight SETTINGS, then press ENTER. The Settings menu opens.

3Press S or T to highlight Reset to Default, then press ENTER. The Settings-Reset to Default menu opens.

4Press S or T to highlight Retail Banner, then press ENTER.

5Press S or T to highlight On (displays an electronic banner on the screen) or Off (does not display an electronic banner), then press

ENTER.

6Press MENU to return to the previous menu, or press EXIT to close the menu.

28

www.insigniaproducts.com