Insignia NS-BRDVD4, NS-BRDVD4-CA 35

Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

4Press or one or more times to select the PCM downsampling rate you want. You can select 48KHz, 96KHz, or Off.

If you do not have a surround sound receiver connected to your player through one of the digital audio jacks (optical or coaxial), select 48kHz. Otherwise, select the highest sampling rate the receiver supports. See the documentation that came with the receiver.

Note

Setting the optical or coaxial audio output’s PCM downsampling sampling rate too high may result in unpredictable audio playback. If you are not sure, set the rate to 48kHz.

5Press to go to the previous menu.

Selecting the digital audio output mode

To select the digital audio output mode:

1Press ENTER. The Settings menu opens.

2Press or to select Audio, then press ENTER. The Audio menu opens.

3Press , press or to select Digital Output, then press ENTER.

4Press or to select the digital output mode you want, then press ENTER. You can select:

•PCM—Sends a PCM audio signal of up to 7.1 channels over the HDMI connection and up to 5.1 channels over the coaxial or optical connection.

•Bitstream HD—Lets your player send Dolby TrueHD or DTS-MA bitstreams over HDMI (if your player is connected to a compatible HDMI audio receiver). If your player is not connected to a compatible HDMI receiver (for example, your player is connected directly to the TV or your player is connected to an audio receiver using an optical or coaxial cable), a compatible audio signal is automatically sent over the