Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

Power

Problem

Solution

No power

Make sure that the power cord is plugged into a power outlet and that

 

the outlet is supplying power.

 

 

 

 

 

The player switches to standby mode

After a period of inactivity, your player switches to standby mode

 

automatically. This is a power saving feature.

 

If your player switches to standby mode unexpectedly, a safety device

 

may have been activated. Press

 

 

STANDBY/ON on the front of your

 

 

 

 

player.

 

 

 

 

 

Operation

Problem

Remote control does not work

Some or all functions do not work

Playback fails to start or starts then stops even when (play/pause) is pressed

Start up is slow and audio and video output takes a long time

Solution

Make sure that you are pointing the remote control at the remote control sensor on the front of your player.

Make sure that there are no obstructions between the remote control and the remote control sensor on the front of your player.

Make sure that there is no colored glass between the remote control and the remote control sensor on the front of your player. Colored glass, such as the glass door of an entertainment center, can interfere with signal reception.

Make sure that the remote control sensor is not exposed to direct sunlight or bright light. These can interfere with signal reception.

Replace the batteries.

Some functions are not allowed by the disc, for example, fast-forwarding through the warning information at the beginning of the disc.

Condensation may have formed inside your player. Turn off your player and wait one to two hours for the condensation to evaporate.

Reset your player. For instructions, see “Resetting your player” on page 52.

Make sure that the disc is inserted face up in the disc tray.

Make sure that the disc is not dirty. For instructions, see “Cleaning discs” on page 51.

The disc may be blank or incompatible with your player. Try another disc.

If power has been interrupted or the power cord has just been connected, startup is slow. This is not a defect.

If your player is connected to the TV with an HDMI cable, startup is slow. This is not a defect.

www.insigniaproducts.com53