NS-DSC1110A 10 Megapixel Camera

Setting the metering function

An icon that corresponds to the metering

 

This feature controls exposure metering in

mode selected will appear on the left side of

 

the LCD.

 

recording still images.

 

 

Note

The metering function can only be set when Simple mode is set to Off.

To set the metering function:

1Press MODE to switch to Photo mode.

2 Press MENU to open the Record menu.

Metering icon

5Press MENU again to close the menu.

Turning burst mode on or off

Burst mode allows for continuous shooting of photos. Burst mode is not available in Video mode.

Note

3Press / or / to highlight Metering, then press OK/DISP to open the submenu.

4Press / or / to select the setting you want, then press OK/DISP. You can select:

•Center—Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

•Multi—Divides the image into several zones and measures the light in each zone for a balanced exposure reading. Your camera determines shooting conditions according to the measured lighting pattern, and makes exposure settings accordingly.

•Spot—Locks the spot metering frame to the center of the LCD.

The burst mode setting can only be adjusted when Simple mode is set to Off.

To turn burst mode on or off:

1Press MODE to switch to Photo mode.

2 Press MENU to open the Record menu.

3Press / or / to highlight Burst Mode, then press OK/DISP to open the submenu.

4 Press / or / to select On or Off, then press OK/DISP.

16

www.insigniaproducts.com