|
|
|
|
|
|
| |
| To imprint the date and time on photos: | 4 Press / | or / to highlight Date & Time, | |||||
1 Turn on your camera, then press MODE to | then press | / or OK/DISP to open the date | |||||
| switch to Photo | mode. | and time screen. | ||||
2Press MENU. The
3Press 
/
or 
/ 
to select the 
(setup) tab. The Setup menu opens.
5 Press 
/
or 
/
to set the hour, then press / 
to move to the minutes field.
Tip
4Press 
/
or 
/
to highlight Date Stamp, then press 
/
or OK/DISP to open the submenu.
You can press and hold a navigation button to change the values continuously.
6Repeat Step 4 to select AM or PM and to enter the year, month, and day.
Note
If the batteries are removed for longer than 48 hours, the date and time must be reset.
7Press MENU to close the menu.
Turning Power Save on or off
Note
The power save function can only be accessed when
Simple mode is set to Off.
5Press 
/
or 
/
to select Off, Date, or Date & Time, then press OK/DISP.
6Press MENU to close the menu.
Setting the date and time
Note
•The date and time can only be set when Simple mode is set to Off.
To set the date and time:1Turn on your camera, then press MODE to switch to Photo 
or Video 
mode.
2Press MENU. The
3Press 
/
or 
/ 
to select the 
(setup) tab. The Setup menu opens.
The Power Save function automatically turns off your camera after being idle for a specified period of time to save power.
This function is turned off when:
•Recording and playing a video
•Erasing or copying files
•Using the USB connector
Note
Connecting your camera to a computer using the USB connector will not recharge your camera's batteries or enhance battery life. Make sure that you disconnect your camera from the computer and power down your camera when you are finished transferring files to your computer.
To turn Power Save on or off:1Turn on your camera, then press MODE to switch to Photo 
or Video 
mode.
2Press MENU. The
20 | www.insigniaproducts.com |