Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo

Using the TV

Note

Unless noted, all buttons in the following instructions are remote control buttons.

Watching TV

Note

The first time you connect your TV combo to an antenna or cable TV, it automatically scans for and memorizes available channels.

To watch TV:

1Connect your antenna, cable TV, or satellite receiver.

To search for a minor channel for the major channel your are currently watching:

•Press the +10/+100 button.

If the major channel has a one-digit channel number, press the number button for the major channel, press the ENTER button, then press the number button for the minor channel.

If the major channel has a two-digit channel number, press the number buttons for the major channel, then press the number button for the minor channel. If you press the ENTER button after you enter the two-digit major channel number, your TV combo tunes to the smallest minor channel number.

2Plug your TV combo power plug into a power outlet.

3Press the POWER button to turn on your TV combo.

4Press the CH or CH button or use the number buttons to select a channel.

Note

If you are using a cable converter box or satellite receiver, set your TV combo to channel 3, 4, or AUX, then use your cable converter box or satellite receiver to change channels.

Switching modes

To switch modes:

•Press the INPUT button one or more times to select the TV/VCR or DVD mode. The corresponding indicator light turns on the front of your TV combo. For the location of the indicator lights, see “Front control panel” on page 5.

Note

TV/VCR mode includes analog TV, DTV, or AUX mode. To use the VCR, select the TV/VCR mode.

5Press the VOL. or VOL. button to adjust the volume. Press the MUTE button to mute or un-mute the sound.

Changing channels

To select a memorized channel:

•Press the CH or CH button. Or

•Press the appropriate number buttons. If you are selecting a channel number larger than 100, press the +10/+100 button, then press the number buttons for the two lower digits of the channel button. For example, if you want to select channel 120, press the +10/+100 button, press 2, then press 0.

Major and minor channels in digital TV (DTV)

A digital TV (DTV) channel has a main (major) channel and may have one or more sub-channels (minor channels).

When you use the CH or CH buttons to select a channel, the major channel is tuned first followed by the minor channels.

To select a minor channel with the number buttons:

•Press the number buttons for the major channel, then press the number buttons for the minor channel. For example, if the major channel is 12 and the minor channel is 3, press 1, then 2, then 0, then 3. (You must press the 0 if you are selecting a single-digit minor channel number.

Adjusting picture settings

Note

Your TV combo saves this setting even if you turn off your TV combo or disconnect the power.

To adjust picture settings:

1Press the PICTURE button.

2Within five seconds, press the PICTURE button to select the setting you want to adjust. You can select:

•BRIGHT–Increases or decreases the brightness.

•CONTRAST–Increases or decreases the contrast.

•COLOR–Sharpens or softens the color.

•TINT–Adjusts the tint from purple to green.

•SHARPNESS–Increases or decreases the sharpness.

3Press the or button to adjust the setting.

10

www.insignia-products.com