4Press MEMORY/SLOW to store the station.

5Repeat Steps 1 - 4 to preset another station.

To tune to a preset station:

•In Tuner mode, press NEXT /

PRESET + or PREVIOUS /PRESET - or use the number buttons (0~9) on the remote to select the station preset you want.

To use auto radio scan:

1Press SOURCE on the front panel of your DVD receiver to select AM or FM.

2Press and hold PLAY for four seconds. The receiver enters auto scanning mode and tunes to the available radio stations.

3When the scan is completed, you can select the station you want by pressing NEXT or the number button of the preset station.

Listening to an external source

To listen to an external source:

•Press SOURCE on the front panel of your DVD receiver repeatedly to cycle through the available sources (DVD, FM/AM/AUX, or COAXIAL).

Accessing and using the setup menus

From the Setup Menu screen you can access all playback options.

To use the Setup menu:

1Press SETUP. The Setup menu opens.

2Press / / / to select the option you want, then press ENTER to confirm your selection.

3To exit the Setup menu, select EXIT SETUP, then press ENTER.

Menu

Available options

 

 

SETUP

Pressing SETUP displays the main Setup

menu.

 

 

 

GENERAL SETUP

TV Display–Select the aspect ratio of your TV screen.

•4:3 PS–Pan and Scan crops both sides of the wide screen format to fill a standard 4:3 TV screen.

•4:3 LB (default)–Letterbox places black bars at the top and bottom of the screen to provide a wide screen picture on a standard 4:3 TV screen.

•16:9–Wide screen TV. The DVD receiver automatically outputs the recorded signal in the correct aspect ratio. Make sure that you set your TV screen mode to FULL.

Notes: Some DVD discs do not permit Pan and Scan mode playback and automatically play back in Letterbox mode, and vice versa.

If the 16:9 wide screen option is selected with a standard 4:3 TV, the playback picture appears distorted.

TV TYPE–Select the color system to match the attached TV.

•Multi. System–Select if the attached TV is multi system. The output format depends on the video signal of the disc.

•NTSC (default)–Select if your TV is NTSC. Outputs the video signal of PAL discs in NTSC format.

•PAL–Select if your TV is PAL. Outputs the video signal of NTSC discs in PAL format.

OSD LANG.–Select the language for the on-screen display. English is the default.

VIDEO OUTPUT–Select the type of video output you use to connect to your TV.

•Y Pb Pr–Select if you use the VIDEO OUT COMPONENT jacks to connect to your TV.

•S-VIDEO(default)–Select if you use the S-VIDEO jack to connect to your TV.

12

www.insignia-products.com