Insignia NS-H2001 13

Menu	Available options

SPEAKER SETUP

CENTER DELAY–If your listening position is closer to the center speaker than the front speakers, you can adjust this setting to improve the surround sound effect. The default setting is OFF.

REAR DELAY–If your listening position is closer to the rear surround speakers than the front speakers, you can adjust this setting to improve the surround sound effect. The default setting is OFF.

TEST TONE–Set to ON to test the speaker settings. Sends a test tone through each speaker in sequence. The default setting is OFF.

AUDIO SETUP

COMPRESSION–Select the dynamic range compression that best suits your listening situation.

•FULL–Fully compressed dynamic range.

•7/8~1/8–Partially compressed dynamic range settings.

•OFF (default)–Uncompressed dynamic range.

Note: In many listening situations, loud sounds may be objectionable, so the loudest sounds must be compressed downwards in level. Likewise, the low level sounds may be inaudible and must be increased in level to be heard. Dolby Digital provides dynamic range compression for these situations.

Menu	Available options

PREFERENCES SETUP

Note: Playback must be stopped to access the Preferences Setup menu.

AUDIO, SUBTITLE, and DISC MENU–Select the audio, subtitle, and disc menu language.

Note: The default subtitle language is English. The default setting for audio and disc menus is OFF.

RESET–Select to reset all the items in the

Setup menu to default settings.

Playback options

Playing a selected title

To play a selected title:

•Press TITLE during DVD playback. TITLE MENU appears on the screen, then the title menu opens.

Note

Depending on the DVD disc you are playing, when you press TITLE, playback may restart from the beginning of the disc, go back to the upper menu, or perform no operation.

Moving to another title or chapter on a DVD

Some discs may contain more than one title or chapter. If the disc has a title or chapter menu recorded on it, you can start playback from any point you want.

To move to another title or chapter:

1During DVD playback, press SEARCH repeatedly to display the menu on the television screen.

2Press / to go to title or chapter.

3Press the number buttons (0~9) to select the title or chapter you want, or to input a time.

4Press ENTER to start playback from that point.

Using programmed playback

You can play back the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored.

To program playback:

1When playing a CD, press STOP to enter

pre-Stop mode, then press STOP again to enter Stop mode.