3Press to highlight an option, then press OK/ENTER to access the
•
•
•Audyssey Dynamic
•Digital
•
•
•
•
•Audio
•Reset Audio Settings— Reset all audio settings to factory defaults. When you select
this option, a confirmation box opens. Press or to select Yes or No, then press OK/ENTER to confirm.
4Press or to modify a scale or to move from left to right to make a choice in a submenu.
Press or to move up or down when selecting from a list of choices in a submenu.
5Press MENU to go to the previous menu or EXIT to close the menu.
Playing TV audio only
When watching TV, you can turn off the TV picture and listen to the audio only.
To play TV audio only:1Press MENU. The
PICTURE | AUDIO CHANNELS SETTINGS |
Picture |
|
Mode | Vivid |
Brightness | 42 |
Contrast | 45 |
Color | 54 |
Tint | 0 |
Sharpness | +5 |
OK | MENU PREVIOUS | EXIT EXIT |
MOVE ENTER SELECT |
Adjust settings to affect picture quality
2Press or to select CHANNELS. The Channels menu opens.
| PICTURE | AUDIO CHANNELS SETTINGS |
| |
Channels |
|
|
|
|
Auto Channel Search |
|
|
| |
|
|
| ||
Add/Skip Channels |
|
|
|
|
Favorites |
|
|
|
|
Channel Labels |
|
|
|
|
Channel Strength |
|
|
|
|
Audio Only | OK |
| Off |
|
|
| |||
MOVE | MENU PREVIOUS | EXIT EXIT |
| |
ENTER SELECT |
|
Adjust channel options
3Press to highlight Audio Only, then press OK/ENTER or to access the
4Press or to select On or Off.
Note
•It takes about 3 seconds after the menu closes and the picture disappears before the audio plays.
•Audio Only works only when the input source is TV and your TV is receiving a broadcast signal.
•To exit Audio Only mode, press any button. When you exit Audio Only mode, the Audio Only option is automatically reset to Off.
Changing channel settingsNote
Unless otherwise noted, all tasks in this section are based on using the remote control.
Automatically scanning for channels
When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH or CH , your TV goes to the next or previous channel in the channel list and skips the channels that do not have signals.
If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels.
To automatically scan for channels:1Press MENU. The
PICTURE | AUDIO CHANNELS SETTINGS |
Picture |
|
Mode | Vivid |
Brightness | 42 |
Contrast | 45 |
Color | 54 |
Tint | 0 |
Sharpness | +5 |
OK | MENU PREVIOUS | EXIT EXIT |
MOVE ENTER SELECT |
Adjust settings to affect picture quality
www.insigniaproducts.com | 17 |