Insignia NS-L32Q-10A Using learning, Deleting a single learning key, Deleting all learned keys in a specific mode, Programming a learned key, Changing volume lock

						NS-L32Q-10A
	6 To check for other device codes, repeat Steps 1			6 Repeat Steps 4 and 5 to program another key.
		through 5, substituting the device key for the			Once you have completed programming all the
		device you would like to check.			keys you want, press and hold SET until the LED
Using learning					blinks twice to save all data learned.
				Deleting a single learning key
	This universal remote control includes a learning
	feature (some models may not include this) so you			This process returns the key to its original
	can add functions that are unique to your home			programming for the mode you select. You can also
	entertainment devices (such as VCR Tracking Up or			delete learned programming by teaching a
	Down). However, there are some considerations to			different function to the key (see “Programming a
	keep in mind.			Learned Key” above).
	Precautions
					Note
	• Your original remote controls must be in working
						If more than 10 seconds pass between key presses,
	order for learning to work properly.
						the remote exits programming.
	• Learned keys are mode-specific, so each one can					If the LED displays one long flash instead, either your
	store a unique function for each mode.					batteries are low, or the Insignia remote control has a
	• Do not use the following keys for learning: Device					memory fault. In either case, the remote cannot learn
						a new key.
	Keys, SET, or (record).
				To delete a single learned key:
	• Learning capacity is approximately 42 to 75 keys,
	depending on the code being learned.			1 Press the mode key that you wish to remove the
	• Certain device functions are not learnable,				learned key from.
	including multi-frequency types, some high			2 Press and hold SET until the LED blinks twice,
	frequency functions, and other unusual formats.				then release.
	• For optimum learning, avoid high levels of			3 Enter 9 7 6. The LED blinks twice.
	ambient light such as natural sunlight or
				4 Press the key containing the learned function to
	energy-efficient fluorescent lights.
					be deleted, twice. The LED blinks twice and
		Note			programming ends.
			Please have your original remote controls handy	Deleting all learned keys in a specific mode
			before programming learning.
Programming a learned key					Note
	To program a learned key:					If more than 10 seconds pass between key presses,
						the remote exits programming.
	1 Place your Insignia remote control					If the LED displays one long flash instead, either your
		head-to-head (about 2" apart) from your				batteries are low, or the Insignia remote control has a
						memory fault. In either case, the remote cannot learn
		original remote control (the one that came with				a new key.
		the device). Also, locate the key (on your original
		remote control) that you want the Insignia		To delete all learned keys in a specific mode:
		remote control to learn. Press the mode key you		1 Press and hold SET until the LED blinks twice,
		wish to learn functions on.
					then release.
	2 Press and hold SET until the LED blinks twice,
				2 Press 9 7 6. The LED blinks twice.
		then release.
				3 Press a mode key twice (for example, TV, DVD,
	3 Enter 9 7 5. The LED blinks twice.
					STB, or AUX) to clear all the learned keys for that
					mode. The LED blinks twice and programming
		Note
					ends.
			If more than 10 seconds pass between key presses,
				Changing volume lock
			the remote exits programming.
			If the LED displays one long flash instead, either your	The Insignia universal remote control comes preset
			batteries are low, or the Insignia remote control has a
			memory fault. In either case, the remote cannot learn	to allow independent volume control of each
			a new key.	selected device (global volume unlock). However,
	4 Press the key on the remote you wish to			you may change the volume lock setting to global
				volume lock so that one device's volume controls
		program. The feedback LED stays lit for three		volume in all other modes. After that, you can
		seconds, indicating that the remote is ready to		perform Individual volume unlock on a selected
		learn.		device to set its volume control for independent
	5 On the original remote, press and hold the key			operation or global volume unlock to remove all
		to be learned. Continue holding the key on the		volume locking.
		original remote until the Insignia’s LED blinks		To lock volume control to one mode (global
		twice.
				volume lock):

Note

If the red LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SET to exit programming and review the Precautions” above. If needed, also see “Troubleshooting remote control programming” on page 32. After reviewing, start programming again at Step 1.

1Press and hold SET until the red LED blinks twice, then release.

2Enter 9 9 3, the LED blinks twice.

3Press the mode key for the device you want to control (for example, TV).

30 www.insigniaproducts.com