Insignia NS-R2001 AM/FM Stereo Receiver

2 Press TUNE/PRESET to select the tuning mode.

Manual tuning

Manual tuning is useful when you already know the frequency of the station you want to listen to.

To manually tune a radio station:

1 Repeatedly press BAND on the receiver or TUNER on the remote control to select AM or FM.

Note

Each time this button is pressed, the mode changes as follows:

•TUNING mode—PRESETturns off.

•PRESET mode—PRESETlights up.

3Rotate the UP/DOWN knob quickly (over

several steps once) or press hold the TUNE

/ buttons for more than 0.5 seconds.

OR

The tuner searches until a station of sufficient strength has been found. The display shows the tuned frequency and TUNE.

If the station found is not the station you want to listen to, repeat this procedure.

Weak stations are skipped during auto tuning.

OR

Band Frequency

2Press TUNE/PRESET to select the tuning mode.

Note

Each time this button is pressed, the mode changes as follows:

•TUNING mode—PRESETturns off.

•PRESET mode—PRESETlights up.

3 Rotate the UP/DOWN knob one by one slowly or press the TUNE / buttons repeatedly until the right frequency has been reached.

OR

8

www.insigniaproducts.com