Insignia
| To connect the antennas: | Connecting speakers |
1Connect the FM antenna to your receiver.
Speaker A
Note
If you are using an indoor FM antenna, change the position of the antenna until you get the best reception of your favorite FM stations.
To improve reception, you may use a 75 Ω outdoor antenna instead of an indoor antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
2Connect the AM loop antenna to the receiver.
Note
Place the AM loop antenna as far as possible from the receiver, television, speaker cords, and the AC cord. Change the position of the antenna until you get the best reception of your favorite AM stations.
To improve reception, you may use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Connecting audio componentsCD player |
|
|
|
Tape deck | PLAY (LINE) OUT | REC IN | MD recorder |
|
Right | Left |
Right | Left |
Speaker B
Caution
Use speakers with an impedance of 8 Ω or more if using only the SPEAKER A or SPEAKER B terminals. Use speakers with an impedance over 16 Ω or more if using both the SPEAKER A or SPEAKER B terminals.
Do not let the bare speaker wires touch each other or any metal part of this receiver. Doing so may damage the receiver or speaker.
REC (LINE) IN
PLAY OUT
•Connect your speaker cables to the receiver.
Notes
Turntable with
Note
To connect a turntable with an MC type cartridge, use a separate head amplifier or
If you have only one pair of speakers, connect them to the SPEAKER A terminals.
Be sure to connect the speakers firmly and correctly according to the channel (left and right) and the polarity (+ and
If the sound is unnatural and lacks bass, the speaker polarity is incorrect.
Connecting headphones4 | www.insigniaproducts.com |