Insignia NS-R2001 Adjusting the sound volume balance, Listening to the radio, BAL, BAND, TUNER, UP/DOWN, BASS+/–, UP/DOWN, Balance, TREBLE+/

Insignia NS-R2001 AM/FM Stereo Receiver

2Within the tone mode, rotate the UP/DOWN knob or press the TREBLE+/– or BASS+/– buttons to adjust the tone.

2Within the balance mode, rotate the UP/DOWN knob or press the BALANCE L/R buttons to adjust the balance.

OR	OR

Notes

•If the tone display disappears, start again from step 1.

•While displaying "TON CTRL", if the UP/DOWN knob is rotated, "TON DIR" will be displayed, and vice versa.

•When pressing the TREBLE+/– or BASS+/– buttons, you can skip step 1.

•Extreme settings at high volume may damage your speakers.

•In general, the bass and treble levels are adjusted to 0.

3Press the TONE DIRECT button to listen to a program without the tone effect.

Notes

•TON DIR is displayed, DIR lights up and the sound bypasses the tone circuitry.

•To cancel the tone direct function, press this button again. TON CTRL is displayed and DIR turns off.

1Press Balance. BAL and the balance level are displayed for three seconds.

Note

•If the balance display disappears, start again from step 1.

•When pressing the BALANCE L/R buttons, you can skip step 1.

•In general, the balance levels are adjusted to 0 dB.

1Repeatedly press BAND on the receiver or TUNER on the remote control to select AM or FM.

Band Frequency