Rocketboost™ Wireless Subwoofer
Note
Some Rocketboost hub devices use an
Note
You must join the wireless subwoofer to your Rocketboost hub device. If you have mulitple Rocketboost devices, the hub may not be the Rocketboost sender that is connected to the audio source you want to use with your subwoofer. However, after joining the subwoofer to your hub device, your subwoofer will be able to connect to the sender you are using with the subwoofer.
Setting the low pass filter
Setting the low pass filter lets you select the frequency range of the sound that your subwoofer will reproduce and amplify. Turning the knob counterclockwise to 80 Hz sets the subwoofer to reproduce frequencies lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to reproduce frequencies lower than 150 Hz. The best setting depends on the other speakers you are using with the subwoofer. If you are unsure of the best setting, set this at 150 Hz.
If you are using the subwoofer in wireless mode with a Rocketboost enabled AV receiver or soundbar (for example Insignia
If you are using the subwoofer in wireless mode with
Listening to music and setting the volume
To listen to music and set the volume:
1Turn on your subwoofer and audio source. The power indicator LED on the subwoofer should light steadily. If it is blinking you need to rejoin the subwoofer to your Rocketboost hub device. See “Connecting your subwoofer for wireless mode” on page 11.
2Play music or a movie that you can easily hear the bass sound on.
3Start with the volume level of the sub at its maximum setting. If you are not hearing the audio that matches the music or movie you are playing, press the Next Souce button on the subwoofer until you can hear it. This is because Rocketboost receivers (including the
12www.insigniaproducts.com