Rocketboost™ Wireless Subwoofer

•The Rocketboost network must contain at least one wireless sender device and one wireless receiver device. The wireless subwoofer is a wireless receiver and it is used with a wireless sender (sold separately).

Problem

Solution

 

 

No communication between the

• Make sure that the power indicators of the Rocketboost wireless sender and

Rocketboost sender and

subwoofer are lit solidly. If the indicators are blinking, see “Connecting your

subwoofer.

subwoofer for wireless mode” on page 11.

 

• If the joining process is failing, make sure that only one of your Rocketboost devices

 

has the Hub switch enabled. Note that the hub device is the only device with the

 

green power indicator. Non-hub devices have a blue power indicator.

 

 

No sound

• Check the volume level of the wireless subwoofer or audio sources connected to the

 

wireless sender.

 

• Make sure that all of the audio cables are connected correctly.

 

• Make sure that the power indicators of the Rocketboost wireless sender and

 

wireless receiver devices are lit solidly. If the indicators are blinking, see

 

“Connecting your subwoofer for wireless mode” on page 11.

 

• Make sure the audio source connected to your wireless sender is On.

 

• Make sure the wireless sender or wireless receiver devices are not Muted. The

 

Receive mode indicator light blinks when the device is muted.

 

 

Sound interference

• Experiment with different orientations or locations of your wireless sender device.

 

• Make sure your wireless sender device is more than 18 inches from any WiFi routers

 

you may have.

 

• Shorten the distance between the Rocketboost wireless devices. The maximum

 

distance is 150 feet (45 m), but this distance is reduced as the wireless signal passes

 

through walls or other obstructions.

 

• It is possible other devices like cordless phones, microwaves, wireless routers, etc.

 

may be causing interference. Try turning one device off at a time to determine

 

which device is causing interference.

 

• If your cordless phone or wireless router is causing interference try changing the

 

channel it is using. Please refer to your device’s owner manual.

 

 

Specifications

Wireless Subwoofer

Power supply

120 V AC~60 Hz/0.9 A

 

 

Maximum RCA input signal level

2.0 Vrms

 

 

Crossover

80 Hz - 150 Hz

 

 

Speaker impedance

3 ohms

 

 

Rated output power (at 10% thd)

75 W

 

 

Dimensions (W ×H × D)

11 × 11 × 11 inches

(28 × 28 × 28 cm)

 

 

 

Weight

10.4 lb. (4.7 kg)

 

 

www.insigniaproducts.com15