Insignia NS-RSW211 Connecting your subwoofer, Connecting the power, Deciding on wired or wireless mode

Rocketboost™ Wireless Subwoofer

Feature

Description

4	Connect button	If the wireless subwoofer is in standby, press to turn the wireless speaker on. Press and hold to
4		initiate wireless joining. Press again to go to standby mode.


5	Next Source button	Press to select different audio streams on your Rocketboost wireless network. Each press
5		moves to the next source.
		moves to the next source.

6	Low pass filter	Turn full clockwise to set the filter cut-off frequency to 150 Hz and full counterclockwise to set
6		the filter cut-off frequency to 80 Hz.
		the filter cut-off frequency to 80 Hz.

7	Input select switch	Select the Aux position (up position) to use the subwoofer in wired auxiliary input mode.
7		Select the Wireless position (down position) to use the subwoofer in Rocketboost wireless
		input mode.

8	Aux input	When using the subwoofer in Aux or Wired input mode, connect the subwoofer output of your
8		AV receiver to this input jack.
		AV receiver to this input jack.

9	Power switch	Click to the right to turn the power on. Click to the left to turn the power off.

To connect the power and turn on your wireless subwoofer:

1Plug the AC power cord into a 120 V wall outlet.

2Click the Power switch to the right to turn on the wireless subwoofer. The power indicator turns on.

This product can be used as a standard wired subwoofer or you can upgrade to wireless when the subwoofer is used with other Rocketboost products. If you want to setup the subwoofer in wired mode go to “Setting up and using your subwoofer in wired mode” on page 8. If you want to setup the subwoofer in wireless mode go to “Setting up and using your subwoofer in wireless mode” on page 9.