Rocketboost™ Wireless Subwoofer

Setting up and using your subwoofer in wired mode

Your subwoofer can be used as a standard wired subwoofer with most AV receivers.

Connecting your subwoofer for wired mode

To connect your subwoofer for wired mode:

1Connect the subwoofer output of your receiver to the Aux input of the subwoofer using a subwoofer cable. If your receiver does not have a subwoofer output, connect a left or right pre-amplifier output from your receiver to the Aux input.

2Make sure that the INPUT SELECT switch on the subwoofer is set to Aux (wired).

Setting the low pass filter

Setting the low pass filter lets you select the frequency range of the sound that your subwoofer will reproduce and amplify. Turning the knob counterclockwise to 80 Hz sets the subwoofer to reproduce frequencies lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to reproduce frequencies lower than 150 Hz. The best setting depends on the other speakers you are using with the subwoofer. If you are unsure of the best setting, set this at 150 Hz.

Listening to music and setting the volume

To listen to music and set the volume:

1Turn on your subwoofer and audio source and play music or a movie that you can easily hear the bass sound on.

2Adjust the volume level on your wireless subwoofer by turning the volume knob clockwise or counterclockwise. The level should be set so that the bass volume level best matches the volume level of the rest of your audio system.

Once you have set this volume level you can leave it at this setting. The subwoofer volume will then automatically adjust when you change the volume of your audio source.

8www.insigniaproducts.com