Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

4Press or to select an IP mode, then press ENTER. You can select:

•Dynamic—Uses DHCP to automatically obtain an IP address.

•Manual—Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings.

5Press to go to the previous menu.

Using the network test

Test the connectivity of your player’s configuration by pinging an IP address.

To test the network:

1Press or to select Settings, then press ENTER. The Settings menu opens.

2Press or to select Network, then press ENTER.

3Press , press to select Network Test, then press ENTER. A dialog box opens, showing the progress of the network test. The test results appear shortly.

4When the network test is complete, press ENTER to close the dialog box.

5Press to go to the previous menu.

Upgrading your player’s firmware

We may occasionally offer upgrades to the player’s firmware. There are three ways to update the player:

•Upgrading the player using a network connection

•Upgrading the player firmware with a disc or USB stick

Upgrading the player firmware using a network connection

If you are connected to the Internet, your player can automatically check for software updates on the manufacturer’s website.

50www.insigniaproducts.com