Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

Updating the player firmware with the disc or USB stick

Once you have created an update CD or USB stick as described in the section, perform the following steps to update the player’s software.

To upgrade the player firmware with a disc or USB stick:

1Eject any discs that may be in the player and remove any USB sticks already inserted in the player.

2Turn the player off. If using an upgrade USB stick, insert the USB memory stick into the player’s USB slot.

3Turn the player back on. If you are using an upgrade disc, open the tray and insert the update disc.

4After a short period of time, a screen similar to the one below appears.

Below, select OK to proceed with the update or Cancel to abort, then press the Enter key

Player model

 

INSIGNIA NS-BRDVD4 BD PLAYER

Player current version:

 

PKG_085

Update version:

 

PKG_90

 

 

 

 

 

 

 

Ok

 

Cancel

 

5Press ENTER. The software update begins. During the software update, a timer counts down the approximate number of minutes and seconds remaining for the update.

6Once the update is complete, a screen appears. If you used a CD for the update, eject the update disc, and then throw it away. If you used an update USB memory stick, power down the player, and then erase any update .iso files placed on the USB memory stick before using it again.

Maintaining

General guidelines

•The top and back panels of your player may become hot after a long period of use. This is not a malfunction.

•When your are not using your player, make sure that you remove the disc and put your player into standby mode.

•If you do not use your player for a long period of time, it may not function correctly. Turn on and use your player occasionally.

•Do not place objects on the disc tray.

•Do not locate your player:

•Near heating devices or in an enclosed vehicle

•In an area with a temperature over 104°F (40°C) or humidity over 90%

52www.insigniaproducts.com