Turn off water supply before starting.
Installation must comply with all state and local laws and regulations.
INSTALLING FILTRATION SYSTEM | ||
1 A | ■ Mark hole locations for filter head | |
| and bracket in a spot that allows for | |
| filter replacement. | |
| ■ Drill 1/8" starter holes and attach | |
| bracket to wall with wood screws, | |
| turning until snug. | |
| ■ Remove red filter cap, insert filter | |
Personal Injury: Do not locate filter above an outlet or other | cartridge into filter head and twist | |
clockwise until “LOCK” arrow on the | ||
electrical device. Install head and bracket so that connections | ||
require no stretching, kinking or pinching of tubing. | filter aligns with arrow on bracket. | |
B
from water | to other |
supply line | plumbing |
| fixture |
Property Damage: Tube runs need to form to the cabinet’s contours to allow storage space with no sharp bends. Tubes need clean, perpendicular,
■Determine length of tubing required, then cut to length making sure the cut is perpendicular and
■Insert a white 3/8" tube into inlet side of filter head until it stops.
Press in again to ensure a secure fit.
■Insert the other white 3/8" tube into outlet side of filter head until it stops. Press in again to ensure a secure fit.
C Two water dispenser lines
From filter
One water
dispenser line
Plug
From filter
■ Insert the copper tube(s) from the |
water dispenser into the 3/8" to 1/4" |
■ Connect the white 3/8" tube |
from the right outlet on the filter |
head into the |
until it stops. Press in again to |
ensure a secure fit. |
To remove tube(s) from
depress the release ring and
gently pull tube away.
D
Discharge
tube
From water | To faucet |
supply line |
|
It is normal for approximetly 2 oz. of water to
discharge when filter is removed.
■To redirect filter replacement water discharge, place the supplied 6" clear tube over vent hole on the left side of filter head.
4
