Nortel Networks 3100 manual Installing or upgrading from a computer, Software files

Installing your MCC 3100 for Windows Mobile

•“Installing the software over the air” on page 22

•“Upgrading the software over the air” on page 24

Consult your system administrator for the preferred installation or upgrade method.

Note 1: Disable sleep mode during the installation process.

Note 2: Before beginning the installation process, ensure that your device has at least 10 MB of free hard drive space. If not, you will have to quit the installation to free up additional space. You can add more space by deleting unnecessary files or reducing the size of the Internet Explorer cache.

Note 3: If you are upgrading from an earlier release, you must perform an initial software installation, not an upgrade. After the installation, update the Server IP/Host address on the Login Information screen if instructed to do so by your system administrator.

Installing or upgrading from a computer

With this method, you add the software to your computer, connect your computer to the mobile device with a USB cable, and then install the software by using Microsoft ActiveSync.

To verify that the data connection between MCC 3100 for Windows Mobile and Mobile Communication Gateway 3100 (MCG 3100) is established, see “Data connection between MCC 3100 for Windows Mobile and MCG 3100” on page 103.

See Table 4 "Software files" on page 20 to choose the software for your mobile device.

Table 4: Software files

OS	Form factor	Software file
WM5	Pocket PC	DesktopInstall-MCC3100-en-
		WindowsMobile5-Pocket-PC-single.zip
WM5	Smartphone	DesktopInstall-MCC3100-en-
		WindowsMobile5-Smartphone-single.zip

20 NN42030-107 MC 3100 3.0 Standard 02.02 November 2008