Nortel Networks manual Starting and exiting MCC 3100 for Windows Mobile

Operating your MCC 3100 for Windows Mobile device

Operating your MCC 3100 for Windows Mobile device

This section contains the following topics:

•“Starting and exiting MCC 3100 for Windows Mobile” on page 47

•“Logging on and logging off” on page 48

•“Hiding MCC 3100 for Windows Mobile” on page 51

•“Overview of the main pane” on page 51

•“Navigating screens” on page 54

•“Navigating screens” on page 54

•“Call Alert mode and Phone Volume” on page 57

•“Native dialpad” on page 58

Starting and exiting MCC 3100 for Windows Mobile

This section describes how to start and exit the MCC 3100 application.

Starting MCC 3100 for Windows Mobile

1.On the mobile device, select Start, Programs, Nortel MCC3100. The splash pane appears.

Note: The first time you start MCC 3100 for Windows Mobile, a warning pane appears. Select Yes to run the application.

After the application starts, the Main screen replaces the splash pane.

2.Enter your configuration settings if prompted. For more information about configuring MCC 3100 for Windows Mobile, see “Initial configuration” on page 29.

Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 47