InSinkErator FAUCET owner manual Installing The Faucet

HOW TO USE THIS INSTRUCTION MANUAL

These instructions are separated into main sections, indicated by numbers, and subsections, indicated by capital letters. The manual is setup this way to allow you to take a break at any point after completing a section or subsection without affecting the installation process.

What you’ll see in the instruction manual:

INSTALLING THE FAUCET
A		Unpack faucet components.
		On a firm, flat surface, carefully
2		straighten the copper tubing.
3	■	1

Property Damage: Do not pinch or break copper tubing. Do not distort the last 1 inch of tubing.

1Provides a step-by-step narrative describing the installation step, with check boxes that can be marked as you progress through the installation.

2Contains simple illustrations that provide visual instruction to support the narrative.

3CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.

An imminently hazardous situation, which, if not avoided, will result in death or serious injury.

A potentially hazardous situation, which, if not avoided, could result in death or serious injury.

A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

Note: Tank must be located within 16" of faucet and within 30" or less of a standard grounded outlet. DO NOT extend plumbing or electrical lines.

2"

A minimum of 2" of space is required from the center of the faucet head

to the back wall in order for this appliance to operate properly.

A standard 120-volt grounded electrical outlet is required under the sink for the unit’s electrical power.

3