FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control.

1Open the cover.

2Insert batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

Replace the batteries when you notice a fall off in the operating range of the remote control.

The maximum operable ranges from the unit are as follows.

Remote control sens

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

3Close the cover.

30˚

DBS-30.2

30˚

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

Do not mix new and old batteries together.

Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

Make sure that the + and - ends of each battery match the indications in the battery compartment.

Remove batteries from battery compartment that is not going to be used for a month or more.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

Do not recharge, short-circuit, heat, burn or disassemble batteries.

Opening Screen

In stop mode and “Mode Select“ is set to “Network“, opening screen is displayed.

Home Network

“NETFLIX“: To access the Netflix screen

“CinemaNow“: To access the CinemaNow menu screen

“BLOCKBUSTER“: To access the Blockbuster menu screen

“Home Network“: To access the list of DLNA home server

12

EN

Page 12
Image 12
Integra DBS-30.2, E5SF1UD manual Opening Screen, Open the cover Insert batteries, Close the cover, Using a Remote Control

E5SF1UD, 1VMN29753, DBS-30.2 specifications

The Integra DBS-30.2 is a high-performance audio device designed for audiophiles and home theater enthusiasts seeking superior sound quality and versatile connectivity options. This receiver is engineered to deliver an immersive listening experience, standing out in its category due to its array of advanced features and technologies.

One of its main features is the robust amplification system, which ensures that every sound is reproduced with clarity and precision. The DBS-30.2 boasts a powerful amplifier section that is capable of producing high output power across a range of frequencies, allowing users to enjoy dynamic audio whether they are watching movies or listening to music. The receiver is designed to handle demanding speaker loads while maintaining high levels of fidelity.

The receiver includes support for various surround sound formats, including Dolby Atmos and DTS:X. These technologies enable the creation of a three-dimensional sound environment, allowing listeners to immerse themselves in the audio experience as if they were part of the action. With these formats, the DBS-30.2 can decode and play back multi-channel audio, enhancing the overall experience of both films and music.

In terms of connectivity, the Integra DBS-30.2 is equipped with a wide variety of input and output options. HDMI inputs allow for seamless connection to modern video sources, while legacy connections ensure compatibility with older devices. Additionally, it features built-in Wi-Fi and Bluetooth capabilities, facilitating easy streaming of music from mobile devices and other wireless sources.

The user interface is intuitive, featuring an on-screen display that simplifies navigation through the receiver's vast array of settings and options. Furthermore, the receiver is designed with calibration technology that automatically adjusts sound settings based on the room's acoustics, optimizing performance for different listening environments.

The build quality of the Integra DBS-30.2 is also noteworthy, employing premium materials and craftsmanship that enhance not only durability but also aesthetic appeal. The sleek design allows it to integrate seamlessly into home entertainment systems.

In summary, the Integra DBS-30.2 is an exceptional audio receiver that combines advanced technologies and features, making it a worthwhile addition for anyone passionate about high-quality sound and home theater systems. Whether for casual listening or a full home cinema experience, this device stands as a powerful tool in the pursuit of audio excellence.