Integra Connecting the DPS-6.5, Basic Setup, Connecting Your TV, Using S Video

Connecting the DPS-6.5—Continued

Basic Setup

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

L

AV cable

R
(Supplied)
ANALOG	TV
INPUT
VIDEO IN

AUDIO OUTPUT	VIDEO OUTPUT	IR
FRONT/D. MIX	DIGITAL

1

2

SURR

CENTER

COAXIAL

VIDEO

REMOTE

IN

CONTROL

L

COMPONENT 2

COMPONENT 1

AC INLET

SUPER AUDIO CD & DVD AUDIO/

Y

PB

PR

Y

PB

PR

RS232

VIDEO PLAYER

		MODEL NO. DPS-6.5
R		RATING:	60Hz	11W
		AC 120V
SUB	OPTICAL			OUT
				S VIDEO
WOOFER

• This player is equipped with copy protection technol-

To power outlet

Notes:

Power cord (Supplied)

ogy. Do not connect this player to your TV via a VCR

using AV cables, as the picture from this player will

not appear properly on your TV. (This player may also

not be compatible with some combination TV/VCRs

for the same reason; refer to the manufacturer for more

information.)

1.Connect the VIDEO OUTPUT and AUDIO OUT- PUT ANALOG L/R jacks to a set of A/V inputs on your TV.

Use the supplied AV cable (RCA), connecting the red and white plugs to the audio outputs and the yel- low plug to the video output. Make sure you match up the left and right audio outputs with their corre- sponding inputs for correct stereo sound.

See the following page if you want to use a compo- nent or S Video cable for the video connection.

If you need another pair of stereo outputs (and don’t need to use the multichannel analog outputs), you can use the FRONT/D.MIX 1 or 2 AUDIO OUTPUT jacks (page 20).

2.Connect the supplied AC power cord to the AC INLET, then plug into a power outlet.

•Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front panel Standby/On button, or the remote con- troller, and wait of the “GOOD BYE” message to dis- appear from the player’s display.

•For the above reasons, do not plug this player into a switched power supply found on some amplifiers and AV receivers.

Connecting Your TV

•Connect the DPS-6.5 to the TV directly. If you con- nect the DPS-6.5 to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Using S Video

If your TV (or other equipment) has an S Video input, you can use this instead of the standard (composite) out- put for a better quality picture.

•Use an S Video cable (supplied) to connect the S VIDEO OUTPUT to an S Video input on your TV (or monitor or AV receiver).

18