Integra DPS-6.5 instruction manual Basic playback controls, Resume and Last Memory, Load a disc

Getting Started—Continued

3	Load a disc.
	Load a disc with the label side facing up,
	using the disc tray guide to align the disc
	(if you’re loading a double-sided DVD
	disc, load it with the side you want to
	play face down).

	Button		What it does
		Starts playback.
		If the display shows RESUME or LAST
		MEM playback starts from the resume
		or last memory point (see also “Resume
		and Last Memory” on page 26.)
		Pauses a disc that’s playing, or
		restarts a paused disc.
		Stops playback.
		See also “Resume and Last Memory”
		on page 26.
		Press to start fast reverse scanning.
(remote only)		Press	(play) to resume normal
		playback.
		Press to start fast forward scanning.

4

Play

Remote

controller

Play

Press (play) to start playback.

If you’re playing a DVD or Video CD, an on-screen menu may appear. See “DVD disc menus” on page 27 and “Video CD PBC menus” on page 27 for more on how to navigate these.

•If you’re playing an MP3/WMA disc, it may take a few seconds before play- back starts.

(remote only)	Press	(play) to resume normal
	playback.
	Skips to the start of the current track or
	chapter, then to previous tracks/chapters.
	Skips to the next track or chapter.
	Use to enter a title/chapter/track number.
	Press Enter to select.
	• If the disc is stopped, playback starts
	from the selected title (for DVD),
	group (for DVD-Audio) or track (for
Numbers	CD/SACD/Video CD).

Note:

•You may find with some DVD discs that some play- back controls don’t work in certain parts of the disc. This is not a malfunction.

Basic playback controls

The table below shows the basic controls on the remote for playing discs. The following chapter covers other playback features in more detail.

	On	Standby		Open/
				Close
				Play Mode
	1	2	3
Numbers				Display
	4	5	6
				Dimmer
	7	8	9
		0	Clear
	Top Menu			Menu
			Enter
	Return			Setup
	Audio	Angle Subtitle		Zoom
	Stop		Play	Pause
/			Down	Up
				/
		TV Control
		TV/ Video Channel
	On/		Volume
	Standby

(remote only) • If the disc is playing, playback jumps

to the start of the selected title (VR

mode DVD-RW), chapter (DVD-

Video) or track (DVD-Audio*1/SACD/

CD/Video CD)

*1 within the current group

Resume and Last Memory

With the exception of DVD-Audio and SACD discs, when you stop playback of a disc, RESUME is shown in the display indicating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start play- back the display shows RESUME and playback resumes from the resume point. (If you want to clear the resume point, press (stop) while RESUME is displayed.)

If you take a VCD out of the player after stopping play- back, the last play position is stored in memory. If the next disc you load is the same one, the display shows LAST MEM and playback will resume. For DVD-Video discs (except VR mode DVD-RW), the player stores the play position of the last five discs. When one of these discs is next loaded, you can resume playback.

Notes:

•The Last Memory function doesn’t work with VR for- mat DVD-RW, DVD-Audio or SACD discs.

•If you don’t need the Last Memory function when you stop a disc, you can press Open/Close to stop playback and open the disc tray.

26